Sanding machines are commonly used woodworking machinery. Many people can operate them, but they will not repair them. During the operation of sanding machines, there are often some faults, but these should be eliminated in time, but if they are not handled properly, they may affect production. increase cost.
The deviation of the belt is generally caused by improper adjustment. The normal swing of the belt should be 15-20mm, the swing frequency is 15-20 times/min, the swing speed is moderate and the swing speed is consistent. If it is in an abnormal state, over a long period of time, deviation may occur, especially if the swinging in and out speed is inconsistent, it is more likely to cause abnormal shutdown; the photoelectric switch is damaged, the solenoid valve is damaged, and the swing cylinder is damaged. Poor dust collection and high dust concentration will affect the normal operation of the photocell, and also cause the belt to deviate. The damaged accessories should be replaced in time to improve the dust removal effect.
